|
|
|
|
What is Steel Palisade Fencing? |
![Palisade fencing provides maximum protection against vandals and intruders](smallimages/Steel-Palisade-High-Security-Fencing.gif) |
Steel palisade fencing provides maximum protection against vandals and intruders.
Cold rolled steel pales are attached to horizontal steel rails, which in turn are attached to vertical steel RSJ's, which are concreted or secured with plates or brackets.
This amounts to a virtually impenetratable steel barrier that is available in heights of up-to 4.2 metres. Palisade fencing is a good choice when considering security, versitility, low maintenance, and value for money. |
|
|
|
|
|
|
|
|
|
Steel Palisade Fence Pales
Steel palisade fence pales are cold-roll pressed into two different profiles:
- Conventional 'D' profile.
- Contemporary 'W' profile.
Pale tops are finished in 4 different styles:
- Split-tripple point or single point for high security.
- Rounded or rounded and notched for safety.
|
|
![W-Profile Palisade fencing pales.](smallimages/WProfile.jpg) |
![D-Profile Palisade fencing pales.](smallimages/DProfile.jpg) |
![Tripple point palisade fencing pales.](smallimages/TripplePoint.gif) |
![Single point palisade fencing pales.](smallimages/SinglePoint.gif) |
![Rounded & notched palisade fencing pales.](smallimages/RoundNotch.gif) |
![Rounded palisade fencing pales.](smallimages/Round.gif) |
W-PROFILE |
D-PROFILE |
Tripple Point |
Single Point |
Round Notch |
Round Only |
|
|
|
|
|
|
|
|
|
|
Posts
Optionally available with base plates for bolt-down or cranked over walls. Also available with bracket extensions for barbed wire or razor wire.
![Palisade posts are optionally available with base plates for wall mounting or cranked. Also available for use with barbed wire or razor wire.](smallimages/Palisade-Fence-Posts.gif) |
100 x 55mm |
100 x 44mm |
|
|
|
|
|
|
|
|
|
|
|
Rails
Steel angle rails punched for pale attachment. Connected with 12mm square cup bolts and anti-vandal permacone (snap-off) nuts.
3 sizes:
![Steel palisade angle rails punched for pale attachment. Connected with 12mm square cup bolts and anti-vandal permacone (snap-off) nuts.](smallimages/Palisade-Fencing.gif) |
40mm x 40mm |
45mm x 45mm |
50mm x 50mm |
|
|
|
|
|
|
|
|
|
|
|
Fittings
Rails and pales are fitted using 'rivets & collars' or rounded bolts with permacone nuts (snap-off / anti-vandal).
![Palisade fittings - 'rivets & collars' or rounded bolts with permacone nuts (snap-off / anti-vandal)](smallimages/Permacone.jpg) |
Snap-off Permacone |
Rivets & Collars |
|
|
|
|
|
|
|
|
|
|
|
Link Plates
Link plates, AKA 'Fish Plates' fit through the holes is the steel fencing posts and join the rails together.
![Palisade is available as 'Hot Dipped Galvanised' or 'Galvanised & Polyester Powder Coated to any colour'.](smallimages/Fence-Link-Plates.gif) |
Smooth |
Notched |
Corners |
|
|
|
|
|
|
|
|
|
|
|
Finishes
Available as 'Hot Dipped Galvanised' or 'Galvanised & Polyester Powder Coated to any colour'.
|
|
Hot Dipped Zinc Galvanized |
Galvanized & Polyester Powder Coated |
|
|
|
|
|
|
|
|
|
|
RSJ Steel Fence Post Fixing Options
Generally speaking, there are three different fixing methods for the slotted RSJ fence posts used to secure industrial steel palisade fencing.
- Straight RSJ's designed to be secured in a concrete foundation. The extent to which these are secured below the surface depends on the height if the fencing, the higher the fence, the further the post is concreted into the ground.
- RSJ's with welded base plates, designed to be fastened to concrete or stone surfaces by way of strong industrial anchor fixings and/or chemical fixing compounds.
- Cranked RSJ's that are secured using either of the previously mentioned ways depending on circumstances.
|
|
|
|
CONCRETE FIXED |
BASE PLATED |
CRANKED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Though Bolton Industrial Fencing™ install all types of industrial security fencing, steel palisade fencing and gates are our speciality. |
|
|
|
|
|
|
|
|